Code: CRO0274
Crown CT875 Comtech DriveCore Series Power Amp
€2,233.00
Available to Order
QtyAdd to Cart
Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.
- Flexible Input Routing
- Convection Cooled
- Universal Power Supply
- Integrated Life-Safety Features
- Up to 8X125W in 1U chassis with no fan
- DriveCore™ technology provides >90% efficiency with no compromise in performance
- Patented Feedback and Protection Circuits
- Amplifier is stable for 2 – 16 Ohm Loads
- XFMR 4/8 needed for 70V/100V Applications
| Dimensions | 1.75" x 19" x 15.19" | Weight | 10lbs/4.54kg |
|---|---|---|---|
| Voltage gain | 25 dB | Channels | 8 |
| Sensitivity | 1.4 V | Shipping Weight | 15 lbs/6.8 kg |
| IEC Power Connector | 15A | Rated Power Output (all channels driven) | 75W per CH @ 4 ohms, 75W per CH @ 8 ohms |
| Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) | 110 dB | THD (full rated power, 20 Hz - 20 kHz) | < 0.05% |
| Intermodulation Distortion (from 0 dB down to -30 dB) | < 0.05% | Frequency Response (at 1W, 4/8 ohms) | +/- 0.5 dB |
| Crosstalk (below rated power) 20 Hz to 1 kHz | > 70 dB | Common Mode Rejection (20 Hz to 1 kHz) | > 55 dB, typically > 70 dB |
| DC Offset | +/- 20mV | Idle Power Consumption (Standard Mode) | 23.0W |
