DAS Audio Integral MA1004 | 4-Channel Matrix Power Amplifier with Dante & Alma DSP Control

Code: DASINTEGRAL-MA1004

DAS Audio Integral MA1004: 4x250W 4-channel matrix installer amplifier. Features 4x4 Dante networking, advanced ALMA DSP, and 70V/100V line compatibility.

€2,079.00

Available to Order



QtyAdd to Cart

DAS Integral MA1004 | 4 Channel Low and High Dante Amplifier with DAS Alma DSP Software- 4 x 125w @ 8Ω- 4 x 250w @ 4Ω- 2 x 500w @ 8Ω Bridged / 100v Line

The DAS Audio Integral MA1004 is a highly versatile, 4-channel installation matrix amplifier engineered to serve as the intelligent acoustic "brain" for any commercial sound system. Housed in a durable 2U rack enclosure, this advanced matrix amplifier integrates high-efficiency power distribution with sophisticated onboard digital signal processing (DSP) and native Dante digital audio networking.

Capable of operating across low-impedance setups or high-impedance 70V/100V distributed lines, the MA1004 adapts fluidly to multi-zone installations. It delivers flexible power configurations: 4 x 125W at 8 ohms, 4 x 250W at 4 ohms, or up to 2 x 500W when bridged at 8 ohms or driving a 100V line. With its integrated internal routing matrix, prioritized ducking capabilities, and robust wireless options, the MA1004 is a comprehensive, standalone system management solution.

Key Features
  • Integrated 4x4 Dante Routing Matrix: Features a 4-input, 8-output internal matrix with native 4x4 Dante channels. This lets you route and process digital network audio seamlessly, with the unique capability to inject processed signals back into your Dante network.
  • Advanced ALMA DSP Ecosystem: Provides total system configuration, tuning, and real-time management via DAS Audio ALMA control software over IP. The amplifier also natively supports Open Sound Control (OSC) protocol for third-party automation.
  • Instant Factory Speaker Presets: Holds an onboard memory library capable of storing over 100 global presets and 200 output channel presets. It comes pre-loaded with factory-tuned processing parameters for DAS Audio speaker lines (e.g., MIA, Q-Series, Arco), allowing you to assign separate speaker presets to each individual channel.
  • Clear Front-Panel OLED & Controls: Features a crisp 1.54-inch OLED display paired with intuitive control knobs for quick navigation, signal metering, and immediate access to input/output volume, mutes, source selection, and global preset recall.
  • Flexible Analog Inputs & Phantom Power: Equipped with 4 analog inputs, two of which can be switched to microphone level with +12V Phantom power to handle paging mics or localized speech reinforcement.
  • Built-In Ethernet Switch & Wireless Connectivity: Outfitted with an integrated dual-port Ethernet switch on the rear panel for direct network daisy-chaining without requiring external hardware switches. Onboard Wi-Fi and Bluetooth are also included for direct wireless configuration and control.
Output Power Ratings
  • Amplifier Channels: 4
  • Power 8 Ohms: 4 x 125 W
  • Power 8 Ohms Bridged: 2 x 500 W
  • Power 4 Ohms: 4 x 250 W
  • Power 100 V: 2 x 500 W
  • Power 70 V: 2 x 500 W
Electronics and Audio
  • Amplifier Output Circuitry: Class D
  • Frequency Response: 20 Hz-30 kHz (+0 – 0.5 dB)
  • Input Sensitivity: +20 dBu
  • Max Input Level: +22 dBu
  • Voltage gain: 15.4 dB
  • Controls: Power On/Off, Navigation Knobs
  • Display: OLED 1.54″
  • Cooling: Side-Right-to-Left
  • Amplifier Protections: Short Circuit, DC Output, Temperature, Over/Under Voltage
  • LED Indicators: On, Comms, Signal, Protect
  • Sampling Rate: 48kHz
Connectors
  • Analog Audio Input Connectors: 2 x 3.5 mm Pitch Terminal Block
  • Analog Audio Output Connectors: 2 x 3.5 mm Pitch Terminal Block
  • DANTE Digital In/Out Connectors: 2 x RJ45 Fast Ethernet
  • Speaker Output Connector: Terminal Block
Power
  • AC Input Connector: IEC
  • Power Supply: Universal Mains Switch Mode
  • Operating Range: 90 – 250 VAC
  • Current Draw 230 V / 115 V: 1.75 A / 3.5 A
DSP
  • Analog Input Channels: 4
  • Analog Output Channels: 8
  • DANTE Input Channels: 4
  • DANTE Output Channels: 4
  • AD Converters: 24 Bit @ 48 kHz 118 dBA Dynamic Range
  • DA Converters: 24 Bit @ 48 kHz 118 dBA Dynamic Range
  • Internal Precision: 32 Bit, 64 Bits Double Precission
  • Latency: 1 ms
  • Delay: 50ms per input / 120ms per output
  • Equalizer: LCD
  • Crossover: Linkwitz-Riley, Butterworth, Bessel
  • High and Low Pass Filters: Up to 48 dB/oct
  • Limiters: RMS, Peak
  • Load Monitoring: Yes
Dimensions-Weight
  • Dimensions ( H x W x D ): 88 x 483 x 208 mm, 3,5 x 19,0 x 8,2 in
  • Net Weight: 3,7 kg ( 8,2 lb )
Shipping
  • Carton Dimensions ( H x W x D ): 170 x 525 x 315 mm, 6,7 x 20,7 x 12,4 in
  • Shipping Weight: 4,5 kg ( 9,9 lb )