GBP (£)
Dbx ZonePro 1261M ZonePro 12x6 Zone Processor 6 Mic/line Inputs + 4 Line Inputs+Wall Panel Control. RS-232 And Ethernet Control. 1261 Is The Same As The 1260 But Without Front Panel Display.
The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m.
- 12 Inputs / 6 Outputs
- 6 Balanced Mic/Line Inputs
- 4 Unbalanced, Mono-Summed RCA Input Pairs
- S/PDIF Input
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
| Max Input | +20dBu Mic/Line, +12dBu RCA | BTU | <92.13 |
|---|---|---|---|
| Safety Agency Certifications | UL 60065, IEC 60065, E 60065, EN 55013 | Propagation Delay | 0.8 msec |
| Mic Preamp gain | 30 to 60dB | D/A Dynamic Range | 112dB A-weighted, 109dB unweighted, 22kHz BW |
| Shipping Weight | 8.35 lbs / 3.78 kg | Interchannel Crosstalk | >80dB typical |
| Type IV Dynamic Range | >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW | A/D Dynamic Range | (line) >113dB, A-weighted, >110dB unweighted |
| Mic Preamp Equivalent Input Noise (EIN) | < -118dBu, 22Hz-22kHz, 150Ω Source Impedance | Mic Preamp Phantom Power | 15V |
| A/D Converter | dbx Type IV™ Conversion System | THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain |
| Max Output | +20dBu | Dimensions | 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm) |
| Input Impedance | Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered | Output Type | Electronically Balanced, RF Filtered Euroblock |
| Input Type | Euroblock (Mic/Line), RCA (Source) | Operating Voltage | 100-240 VAC, 50/60Hz |
| Input | 12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input | Unit weight | 6.2 lbs / 2.81 kg |
| Output | 6 Total | CMRR | > 40dB, typically >55db @ 1kHz |
| Sample Rate | 48kHz | Output Impedance | 120Ω Balanced, 60Ω Unbalanced |
| Power Consumption | 27 W | Dynamic Range | >110dB A-weighted, >107dB unweighted, 22kHz BW |
| Frequency Response | 20Hz – 20kHz, +/- 0.5dB |
