Dbx ZonePro 641M ZonePro 6x4 Zone Processor For . 4 Mic/line Inputs + 2 Line Inputs.
The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.
- 6 Inputs / 4 Outputs
- 4 Balanced Mic/Line Inputs
- 2 Unbalanced, Mono-Summed RCA Input Pairs
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
| Dimensions | 1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm) | Frequency Response | 20Hz - 20kHz, +/-0.5dB |
|---|---|---|---|
| Dynamic Range | >109 dB A-weighted, >106 dB unweighted, 22kHz BW | CMRR | >40dB, typically >55dB @ 1 kHz |
| Power Consumption | 29 W | Output Impedance | 120Ω Balanced, 60Ω Unbalanced |
| Sample Rate | 48kHz | Output | 4 total |
| Unit weight | 6.05 lbs / 2.74 kg | Input | 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs |
| Output Connectors | Euroblock | Operating Voltage | 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz |
| Input Type | Electronically balanced/RF-filtered | Output Type | Electronically Balanced, RF Filtered |
| Input Impedance | Euroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered | Max Input | +20dBu Mic/Line, +12dBu RCA |
| Input Connectors | Euroblock (Line and Mic) RCA (Source) | Max Output | +20dBu |
| THD+Noise | 0.003% typical at +4dBu, 1kHz, 0dB gain | A/D Converter | dbx Type IV™ conversion system |
| Mic Preamp Phantom Power | +15VDC | Mic Preamp Equivalent Input Noise (EIN) | < -118dBu, 22Hz-22kHz, 150Ω Source Impedance |
| A/D Dynamic Range | (line) >113 dB, A-weighted, >110 dB unweighted | Type IV Dynamic Range | >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW |
| Interchannel Crosstalk | >80dB typical | Shipping Weight | 8.2 lbs / 4 kg |
| D/A Dynamic Range | 112 dB A-weighted, 109dB unweighted, 22kHz BW | Mic Preamp gain | 30 to 60dB |
| Digital Output Dynamic Range | >114 dB A-weighted, 110dB unweighted | Propagation Delay | 0.6 msec |
| Safety Agency Certifications | UL 600065, IEC 60065, EN 55013, E60065 | Indicators | Network Traffic, Power |
| BTU | <92.13 |
