The DPA 2028-B-SL1 Supercardioid Vocal Condenser Microphone Capsule, paired with the SL1 Adapter, is meticulously crafted to meet the distinct demands of...
Boasting a supercardioid condenser capsule, the 2028 ensures a flat off-axis response. This characteristic provides the microphone with exceptional gain-before-feedback, facilitating the management of bleed from nearby instruments for sound engineers. The capsule is securely fixed atop the newly engineered shock mount and is not detachable. Additionally, the pop filter is specifically tailored for use with the 2028 microphone.
- Form Factor: Handheld Capsule
- Sound Field: Mono
- Capsule: Condenser
- Polar Pattern: Supercardioid
- Frequency Range: 20 Hz to 20 kHz
- Maximum SPL: 160 dB SPL Peak
- Impedance: 150 Ohms
- Sensitivity: 5 mV/Pa at 1 kHz
- Dynamic Range: 117 dB A-Weighted
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Effective frequency response: 20 Hz - 20 kHz
- Frequency range, ±2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- THD: < 1% up to 139 dB SPL peak
- Dynamic range: Typ. 117 dB
- Max. SPL, THD 10%: 160 dB SPL peak
- Rated output impedance: 150 Ω
- Minimum load impedance: 1 kΩ
- Cable drive capability: 100 m (328 ft)
- Output balance principle: Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
- Power supply (for full performance): 48 V Phantom power (±4 V)
- Current consumption: Max 2.5 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight: 286 g (10.1 oz)
- Diameter: 48 mm (1.9 in)
- Capsule diameter: 19 mm (0.75 in)
- Microphone length: 188 mm (7.4 in)
- Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
- Polarity: +V at pin 2 for positive sound pressure