DPA d:dicate™ 4006A Omni Mic

Code: DPA4006A

DPA d:dicate™ 4006A Omni Mic

2,297.00

Available to Order



d:dicate™ 4006A Omni Mic

The d:dicate™ 4006 Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB).

4006Ad:dicate™ 4006A Omni Mic

PREAMP

  • MMP-A standard preamp

ACCESSORIES

  • Foam windscreen
  • Diffuse-field grid
  • Close-miking grid
  • Free-field grid


  • Acoustic authenticity
  • Linear throughout a large frequency bandwidth
  • Detailed and natural reproduction
  • High sensitivity and low noise floor
  • Excellent for concert halls and spot miking acoustical instruments
  • Modular flexibility
Weight 163 g (5.7 oz) Color Matte black
Dynamic Range Typ. 124 dB Output Impedance 200 Ω
Frequency Range 10 Hz - 20 kHz Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Current Consumption 2.8 mA Microphone Diameter 16 - 19 mm (0.6 - 0.75 in)
Temperature Range -40°C to 45°C (-40°F to 113°F) Polarity +V at pin 2 for positive sound pressure
Directional pattern Omnidirectional Principle of operation Pressure
Cartridge type Pre-polarized condenser Equivalent noise level, A-weighted Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 79 dB(A) Total harmonic distortion (THD) < 1% up to 139 dB SPL peak
Max. SPL, peak before clipping 146 dB Minimum load impedance 2 kΩ
Cable drive capability 100 m (328 ft) Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR) > 60 dB Power supply (for full performance) 48 V Phantom power (± 4 V)
Capsule diameter 16 mm (0.6 in) Microphone length 170 mm (6.7 in)
Maximum output voltage, RMS 8.0 V Relative humidity (RH) Up to 90 %
Frequency range, ±2 dB 10 Hz - 20 kHz Equivalent noise level, ITU-R BS.468-4 Typ. 27 dB (max. 29 dB)
Switchable attenuator, filters etc. 0 dB / -20 dB Sensitivity, nominal, ±2 dB at 250 Hz 40 mV/Pa; -28 dB re. 1 V/Pa
Matching tolerance (frequency response and sensitivity) ±0.5 dB Phase deviation for kit < 5°

Reynolds of Raphoe Newsletter

Subscribe to our newsletter for the latest news, offers and updates.

Thank you for signing up! We'll be in touch with great offers.