GBP (£)
d:dicate™ 4006A Omni Mic
The d:dicate™ 4006 Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB).
4006Ad:dicate™ 4006A Omni Mic
PREAMP
- MMP-A standard preamp
ACCESSORIES
- Foam windscreen
- Diffuse-field grid
- Close-miking grid
- Free-field grid
- Acoustic authenticity
- Linear throughout a large frequency bandwidth
- Detailed and natural reproduction
- High sensitivity and low noise floor
- Excellent for concert halls and spot miking acoustical instruments
- Modular flexibility
| Max. SPL, peak before clipping | 146 dB | Phase deviation for kit | < 5° |
|---|---|---|---|
| Matching tolerance (frequency response and sensitivity) | ±0.5 dB | Sensitivity, nominal, ±2 dB at 250 Hz | 40 mV/Pa; -28 dB re. 1 V/Pa |
| Switchable attenuator, filters etc. | 0 dB / -20 dB | Equivalent noise level, ITU-R BS.468-4 | Typ. 27 dB (max. 29 dB) |
| Frequency range, ±2 dB | 10 Hz - 20 kHz | Relative humidity (RH) | Up to 90 % |
| Maximum output voltage, RMS | 8.0 V | Microphone length | 170 mm (6.7 in) |
| Capsule diameter | 16 mm (0.6 in) | Power supply (for full performance) | 48 V Phantom power (± 4 V) |
| Common mode rejection ratio (CMRR) | > 60 dB | Output balance principle | Impedance balancing with Active Drive |
| Cable drive capability | 100 m (328 ft) | Minimum load impedance | 2 kΩ |
| Weight | 163 g (5.7 oz) | Total harmonic distortion (THD) | < 1% up to 139 dB SPL peak |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 79 dB(A) | Equivalent noise level, A-weighted | Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)) |
| Cartridge type | Pre-polarized condenser | Principle of operation | Pressure |
| Directional pattern | Omnidirectional | Polarity | +V at pin 2 for positive sound pressure |
| Temperature Range | -40°C to 45°C (-40°F to 113°F) | Microphone Diameter | 16 - 19 mm (0.6 - 0.75 in) |
| Current Consumption | 2.8 mA | Connector | XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Frequency Range | 10 Hz - 20 kHz | Output Impedance | 200 Ω |
| Dynamic Range | Typ. 124 dB | Color | Matte black |
