GBP (£)
This is a high-quality omnidirectional condenser microphone. Due to its uniquely natural and open sound, the d:dicate™ 4090 is suitable for instrument-miking applications in the studio or on the stage.
With 134 dB SPL handling, this microphone can be used with essentially any instrument from acoustic guitar and strings to piano and wind instruments. Due to the mic's remarkably linear frequency response in the 20 Hz to 20 kHz range, sound system engineers can also use these mics for sound system alignment, testing and tuning.
The rugged and compact design features a 5.4 mm (.21 in) diameter pre-polarized condenser capsule in a tapered body measuring just 12 cm (4.76 in).
d:dicate™ 4090 Omnidirectional Microphone, Normal SPL, P48
With 134 dB SPL handling, this microphone can be used with essentially any instrument from acoustic guitar and strings to piano and wind instruments. Due to their remarkably linear frequency response in the 20 Hz to 20 kHz range, sound system engineers can also use these mics for sound system alignment, testing and tuning.
The rugged and compact design features a 5.4 mm (.21 in) diameter pre-polarized condenser capsule in a tapered body measuring just 12 cm (4.76 in).
- Natural and open sound
- For instrument miking in the studio or on the stage
- d:dicate™ 4090: For acoustic guitar, strings, piano and wind instruments
- d:dicate™ 4091: Handles high-SPL with ease
| Common mode rejection ratio (CMRR) | > 40 dB | Sensitivity, nominal, ±3 dB at 1 kHz | 20 mV/Pa; -34 dB re. 1 V/Pa |
|---|---|---|---|
| Frequency range, ±2 dB | 20 Hz - 20 kHz | Relative humidity (RH) | Up to 90% |
| Temperature range | -40°C to 45°C (-40°F to 113°F) | Polarity | +V at pin 2 for positive sound pressure |
| Microphone length | 122 mm (4.8 in) | Microphone diameter | 19 mm (0.75 in); at tip 6.7 mm (0.26 in) |
| Weight | 38 g (1.34 oz) | Color | Black |
| Connector | Color: | Current consumption | 2 mA |
| Power supply (for full performance) | 48 V Phantom power +/- 4 V | Directional pattern | Omnidirectional |
| Output balance principle | Impedance balanced | Cable drive capability | Up to 300 m (984 ft) |
| Output impedance | < 40 Ω | Max. SPL, peak before clipping | 134 dB |
| Dynamic range | Typ. 100 dB | Total harmonic distortion (THD) | < 1% up to 123 dB SPL peak |
| S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Typ. 71 dB(A) | Equivalent noise level, ITU-R BS.468-4 | Typ. 35 dB (max. 38 dB) |
| Equivalent noise level, A-weighted | Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) | Frequency range | 20 Hz - 20 kHz |
| Cartridge type | Pre-polarized condenser | Principle of operation | Pressure |
