DPA d:mension™ Surround Kit with 5 x 4006A, Clips, Windscreens in Peli Case
The 5006A Surround Microphone Kit from DPA Microphones includes five 4006A omnidirectional microphones, matched within 0.5dB on both frequency response and sensitivity. They can be used for AB stereo, Decca Tree, or surround main array recording techniques for orchestral settings. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
- 5 carefully matched microphones
- Suitable for Decca Tree and rear omni surround array
- Especially useful for acoustically accurate reproductions
- Peli case for transportation and protection
Weight | 5.7 oz (163.0g) | Power supply | Power Supply: 48 V Phantom Power (+/- 4 V); Current Consumption: 2.8 mA; Output Voltage: > 4 V |
---|---|---|---|
Color | Matte Black | Frequency Response | 10 Hz to 20 kHz |
Dynamic Range | Typ. 124 dB | THD | < 1 % up to 139 dB SPL peak |
Output Impedance | < 200 ohm | Sensitivity | Nominal ± 2 dB at 250Hz: 40 mV/Pa; -28 dB re. 1 V/Pa |
Output | Connector: 3-pin XLR; Output Balance Principle: Impedance balancing with Active Drive | Polar pattern | Omnidirectional |
Transducer | Pressure, Pre-Polarized Condenser | Signal-to-Noise Ratio | Typ. 79 dB(A) |
Max Input Sound Level (SPL) | 147 dB | Temperature Range | -40 ° to 122 °F (-40 ° to 50 °C) |
Relative Humidity | Up to 90% | Polarity | +V at Pin 2 for positive sound pressure |
Minimum load impedance | 2k ohm | Cable drive capability | Up to 328' (100m) with DAD6001 XLR adapter |
EIN | Equivalent Noise Level, A-Weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)); Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB) | Attenuation / Gain | Switchable attenuator: 0 dB / -20 dB |
Common Mode Rejection | > 60 dB | Dimensions (Diam. x L) | 0.63 x 6.70" (16.00 x 170.00 mm) |