DPA d:mension™ Surround Kit with 5 x 4015A, Clips, Windscreens in Peli Case
The 5015A Surround Microphone Kit from DPA Microphones includes five 4015A wide cardioid microphones matched within +/-1 dB in both frequency response and sensitivity. They can be used in orchestra and acoustic ensemble tracking where it is desirable to blend directional miking with room sound. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
- Wide pickup area and natural sound
- 5 carefully matched microphones
- Ambience pickup with convenient directionality
- Peli case for transportation and protection
Power supply | Power Supply: 48 V Phantom Power (+/- 4 V) ; Current Consumption: 2.8 mA; Output Voltage: > 4 V | Polar pattern | Wide cardioid |
---|---|---|---|
Cable drive capability | Up to 328' (100m) with DAD6001 XLR adapter | Weight | 5.6 oz (158.0 g) |
Output | Connector: 3-pin XLR; Output Balance Principle: Impedance balancing with Active Drive | Minimum load impedance | 2k ohm |
Sensitivity | Nominal ± 2 dB at 1kHz: 10 mV/Pa; -40 dB re. 1 V/Pa | Polarity | +V at Pin 2 for positive sound pressure |
Phase | Phase Deviation for Kit: < 10° | Output Impedance | < 200 ohm |
Relative Humidity | Up to 90% | Dimensions (Diam. x L) | 0.75 x 6.70" (19.00 x 170.00 mm) |
THD | < 1 % up to 139 dB SPL peak | Temperature Range | -40 ° to 113 °F (-40 ° to 45 °C) |
Common Mode Rejection | > 60 dB | Dynamic Range | Typ. 121 dB |
Max Input Sound Level (SPL) | 159 dB | Attenuation / Gain | Switchable Attenuator: 0 dB / -20 dB |
Frequency Response | 20 Hz to 20 kHz; Frequency range, ± 2 dB: 40 Hz to 20 kHz | Signal-to-Noise Ratio | Typ. 76 dB(A) |
EIN | Equivalent Noise Level, A-Weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB) | Color | Matte Black |
Transducer | Pressure, pre-polarized condenser | Equivalent Noise Level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting) | |