Code: DPA5015A
DPA d:mension™ Surround Kit with 5 x 4015A, Clips, Windscreens in Peli Case
€9,157.01
Available to Order
QtyAdd to Cart
The 5015A Surround Microphone Kit from DPA Microphones includes five 4015A wide cardioid microphones matched within +/-1 dB in both frequency response and sensitivity. They can be used in orchestra and acoustic ensemble tracking where it is desirable to blend directional miking with room sound. DPA includes mic holders, grids, and windscreens for all mics. The included Peli foam-lined case can be used for transportation and storage.
- Wide pickup area and natural sound
- 5 carefully matched microphones
- Ambience pickup with convenient directionality
- Peli case for transportation and protection
| Weight | 5.6 oz (158.0 g) | Power supply | Power Supply: 48 V Phantom Power (+/- 4 V) ; Current Consumption: 2.8 mA; Output Voltage: > 4 V |
|---|---|---|---|
| Equivalent Noise Level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting) | Color | Matte Black | |
| Frequency Response | 20 Hz to 20 kHz; Frequency range, ± 2 dB: 40 Hz to 20 kHz | Dynamic Range | Typ. 121 dB |
| THD | < 1 % up to 139 dB SPL peak | Output Impedance | < 200 ohm |
| Sensitivity | Nominal ± 2 dB at 1kHz: 10 mV/Pa; -40 dB re. 1 V/Pa | Output | Connector: 3-pin XLR; Output Balance Principle: Impedance balancing with Active Drive |
| Polar pattern | Wide cardioid | Transducer | Pressure, pre-polarized condenser |
| Signal-to-Noise Ratio | Typ. 76 dB(A) | Max Input Sound Level (SPL) | 159 dB |
| Temperature Range | -40 ° to 113 °F (-40 ° to 45 °C) | Relative Humidity | Up to 90% |
| Polarity | +V at Pin 2 for positive sound pressure | Minimum load impedance | 2k ohm |
| Cable drive capability | Up to 328' (100m) with DAD6001 XLR adapter | EIN | Equivalent Noise Level, A-Weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB) |
| Attenuation / Gain | Switchable Attenuator: 0 dB / -20 dB | Common Mode Rejection | > 60 dB |
| Dimensions (Diam. x L) | 0.75 x 6.70" (19.00 x 170.00 mm) | Phase | Phase Deviation for Kit: < 10° |
