DPA d:vote™ CORE 4099 Mic, Loud SPL with Clip for Bass
The d:vote Core 4099 Instrument Microphone, Loud SPL, with Clip for Bass from DPA is designed to capture audio from your instrument for live sound and recording applications. The clip for bass mount can be adjusted by one hand and is optimized to attach itself gently to your instrument to prevent damage and marks.
The Core 4099 has a pre-polarized condenser capsule with a supercardioid polar pattern. Its gooseneck allows for a variety of positioning possibilities. The microphone terminates with a 5.5" gooseneck and a MicroDot connector. It includes a cable and an XLR adapter providing compatibility with mixers and sound reinforcement systems.
- Core by DPA technology inside
- Supercardioid condenser microphone
- Handles high SPLs
- Superior gain-before-feedback
- Flexible and easy mounting
- Gentle and easy to mount on the instrument
- Detachable cable and a versatile gooseneck extender
Weight | 0.95 oz / 27 g | Power supply | Minimum 5 V to maximum 50 V through DPA adapter |
---|---|---|---|
S/N Ratio | 71 dBA (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) | Output Impedance | From MicroDot: 30 to 40 Ohms; From DAD4099/DAD6001-BC: 100 Ohms |
Frequency Range | 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz (±2 dB, at 20 cm / 7.9") | Connector | MicroDot |
Cable Length | 5.9' / 1.8 m | Equivalent Noise Level | Typical 23 dBA re. 20 μPa (max. 26 dBA) |
Dynamic Range (Typical) | 108 dB | Maximum SPL | 142 dB (peak before clipping) |
Current Consumption | 1.5 mA (microphone), 3.5 mA with DAD4099 or DAD6001-BC XLR adapter | Microphone Diameter | 0.21" / 5.4 mm |
Temperature Range | -40 to 113°F / -40 to 45°C | Relative Humidity | Up to 90% |
Polarity | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter) | Directional pattern | Supercardioid |
Principle of operation | Pressure gradient | Cartridge type | Pre-polarized condenser |
Total harmonic distortion (THD) | < 1% up to 131 dB SPL peak | Cable drive capability | Up to 300 m / 984' with DAD 4099 or DAD 6001 BC XLR adapter |
Output balance principle | Signal balanced with DAD4099 or DAD6001-BC XLR adapter | Microphone length | 1.8" / 45 mm |
Sensitivity, Nominal, ±3 dB at 1 kHz | 6 mV/Pa; -44 dB re. 1 V/Pa | Common Mode Rejection Ratio | > 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter |
Cable Diameter | 0.09" / 2.2 mm | Gooseneck Length | 5.5" / 140 mm |