Powersoft Ottocanali 1204 | 8 x 160W (4 Ohms), 8 x 80W (8 Ohms), 8 x 130W (70V / 100V).
Ultimately flexible and safe, the Ottocanali 1204 provides a wide range of system control and monitoring capabilities as well as sound shaping options, and a total of up to 1,280 W output power over 8 amplifier channels for Lo-Z or constant voltage systems, all neatly packed into a single rack unit: As 'stand-alone' in corporate board rooms, or along with Powersoft Duecanali models in the largest setups, the Ottocanali 1204 fits any venue.
The Ottocanali 1204 offers unprecedented versatility and efficiency, also thanks to its very own set of BatFormers®. These are specifically developed, optional plug-in output transformers that can be easily installed through a dedicated lid in the amplifier chassis, and that allow the conversion of any - or all - of the 8 channels into a 70V or 100V constant voltage output.
Compliant with IEC 60849, and on par with the Duecanali Series, the Ottocanali 1204 DSP+ETH matches the crucial requirements for sound systems for emergency purposes.
- Universal switch mode power supply up to 400VAC tolerant with Power Factor Correction
- Patented output filter with ripple cancellation network
- Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
- Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
- Ac protection: shut down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
- DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
- Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
- Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
- Thermal protection: output stages operating temperature up to 80 °C (176 °F)
- Temperature controlled continous variable speed fan, front to back airflow
- Fixed frequency switchmode output stage for high grade sound accuracy
- Compact 1 RU for reduced rack cost and space
- Light weight - for easier racking and shipping: 5-11 kg (11-24.3 lbs) depending on number of BatFormers
- Standard Phoenix connectors: analog and digital input, audio outputs, aux supply, alarms and GPIO
- Remotely switchable inputs (main and aux) per channel
- Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
- Switchable 35Hz / 70Hz high pass filter per channel
- Mixed configuratio with Lo-Z/Hi-Z systems possible
- Bridged mode low impedance per channel pair
