GBP (£)
Code: SHUGLXD14+UK/SM31-Z4
Experience high-quality digital wireless audio with the Shure GLXD14+ headset system. Includes SM31 headset mic for clear vocals during performances.
€779.00
Available to Order
QtyAdd to Cart
Shure GLXD14+ Digital Wireless Headset System with SM31 Headset Microphone
Experience exceptional wireless performance with the Shure GLX-D+ Wireless System, now featuring advanced dual-band technology for superior signal clarity and reliability. Operating in both 2.4 GHz and 5.8 GHz frequency ranges, this system automatically scans for the best available channel while selecting backup frequencies to prevent dropouts—ensuring seamless audio transmission for performers, presenters, and fitness instructors.
Key Features:
Key Features:
- Dual-Band Wireless Technology: Operates in both 2.4 GHz and 5.8 GHz for expanded bandwidth and minimal interference.
- Seamless Frequency Management: Auto-scans and selects the best channel while providing backup frequencies for uninterrupted performance.
- Extended Battery Life: New rechargeable lithium-ion battery delivers up to 17 hours of continuous use (2.4 GHz) and 12 hours (5.8 GHz).
- Quick Charge Functionality: A 15-minute charge provides 1.5 hours of use, perfect for last-minute setups.
- Reliable Signal Stability: Features removable, adjustable dual antennas on the receiver for enhanced RF performance.
- Effortless Setup: Instantly pairs transmitters and receivers for a hassle-free experience.
- Durable SM31 Headset Microphone: Sweat-resistant, corrosion-proof design, ideal for fitness instructors and active performers.
GLXD4+ Dual Band Wireless Receivers
- Dimensions (H x W x D): 7.2 x 4.8 x 1.6 in (182.8 x 121.97 x 40.3 mm), antennas folded
- Weight: 10.9 oz. (310 g)
- Housing: Molded plastic
- Power Requirements: 14.5 V - 17 V, 600 mA
- Spurious Rejection: >35 dB, typical
- Gain Adjustment Range: -20 to 40 dB in 1 dB steps
- Phantom Power Protection: Yes
- Configuration:
- XLR Output: Impedance balanced
- 6.35 mm (1/4") Output: Impedance balanced
- Impedance:
- XLR Output: 100Ω
- 6.35 mm (1/4") Output: 100Ω (50Ω, Unbalanced)
- Maximum Audio Output Level:
- XLR Connector: 1 dBV (into 600Ω load)
- 6.35 mm (1/4") Connector: +8.5 dBV (into 3kΩ load)
- Pin Assignments:
- XLR Output: 1=ground, 2=hot, 3=cold
- 6.35 mm (1/4") Output: Tip=audio, Ring/Sleeve=ground
- Receiver Antenna Input Impedance: 50Ω
- Antenna Type: Dual Band 1/2 Wave Sleeve Dipole, non-removable
- Maximum Input Level: -20 dBm
- Dimensions (H x W x D): 4.5 x 2.6 x 1.1 in (115 x 66.94 x 28.51 mm), without antenna
- Weight: 5.4 oz. (153.1 g), without battery
- Power Requirements: 3.7 V rechargeable, lithium ion
- Housing: Cast metal, black powdercoat
- Input Impedance: 900 kΩ
- RF Output Power: 10 mW E.I.R.P. max.
- Input Connector: 4-pin male mini connector (TA4M)
- Input Configuration: Unbalanced
- Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)
- Antenna Type: Dual Band Internal Monopole
- Pin Assignments TA4M:
- 1: Ground (cable shield)
- 2: +5 V bias
- 3: Audio
- 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
- Connector: TA4F (TGQ)
- Type: Condenser
- Frequency Response: 45 Hz - 20 kHz
- Polar Pattern: Cardioid
- Phantom Power Requirement: Supplied from bodypack
- Output Impedance: 600Ω
- Audio Output Level: -50 dBV/Pa
- Signal-To-Noise Ratio: 66 dB
- Maximum SPL: 145.0 dB
- Dynamic Range: 117 dB
- Equivalent Output Noise: 28 dB
- Cable Length: 1.1 m
- Net Weight: 60 g
